Install the latest stable version of **cropgrowdays**
via CRAN with:

You can install the development version of
**cropgrowdays** from `GitLab`

with:

The **cropgrowdays** package provides functions to
calculate agrometeorological quantities of interest for modelling crop
data. Currently, functions are provided for calculating growing degree
days, stress days, cumulative and daily means of weather data.
Australian meteorological data can be obtained from Queensland
Government’s Department of Environment and Science (DES) website. In
addition, functions are provided to convert days of the year to dates,
and *vice-versa*.

We recommend using the **cropgrowdays** package in
conjunction with the **tidyverse** and
**lubridate** packages. Additionally, we also recommend
using the **furrr** package to speed up adding
agrometeorological variables to large data frames. For this document, we
only use the **lubridate** package as follows.

Note that if you are not familiar with the `lubridate`

package, then in order to see which functions are provided and which
functions conflict with other packages, initially it may best not to
suppress messages using `suppressMessages`

.

The `boonah`

dataset was obtained from the Queensland
Government DES longpaddock website https://www.longpaddock.qld.gov.au using the
`get_silodata`

function. Please see getting-weather-data vignette for
details.

The data obtained is

```
## weather data object
print(boonah, n=5)
#: # A tibble: 517 × 10
#: year day radn maxt mint rain evap vp code date_met
#: <int> <int> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <int> <date>
#: 1 2019 1 26.2 33.9 16.3 0 7.8 20.6 222222 2019-01-01
#: 2 2019 2 28.2 33.4 17.6 0 7.7 19.8 222222 2019-01-02
#: 3 2019 3 20.5 32.8 16.7 0 6.8 21.9 222222 2019-01-03
#: 4 2019 4 23 32.5 21 2 7.7 22 222222 2019-01-04
#: 5 2019 5 27 33.6 16.8 0 6 21.8 222222 2019-01-05
#: # ℹ 512 more rows
```

The `crop`

dataset consists of dates for a hypothetical
crop data set which would also usually contain agronomic traits of
interest such as yield, dry matter yield and so on. Each row of data
contains sowing, flowering and harvest dates for a typical field or farm
in Queensland, Australia.

```
## crop data object
print(crop, n=5)
#: # A tibble: 10 × 3
#: sowing_date flower_date harvest_date
#: <date> <date> <date>
#: 1 2019-08-25 2019-10-14 2019-11-03
#: 2 2019-09-20 2019-11-09 2019-11-29
#: 3 2019-12-18 2020-02-06 2020-02-26
#: 4 2020-01-15 2020-03-06 2020-03-26
#: 5 2020-02-15 2020-04-06 2020-04-26
#: # ℹ 5 more rows
```

Example `R`

syntax is provided for calculating daily mean
radiation, total rainfall, growing degree dates and the number of stress
days between two dates. Alternatively, a number of days before or after
a certain date may be specified.

Note that employing mapping functions to add agrometeorological
variables to large data frames can take a substantial amount of
computational time. We describe how to employ the `furrr`

package, which provides a relatively simple way to apply mapping
functions in parallel, to speed up these calculations.

The `growing_degree_days`

function calculates the sum of
degree days for each day \(i = 1 \ldots
n\). The growing degree days \(GDD\) summed over \(n\) days are

\[GDD = \sum_i^n (Tmax_{i} + Tmin_{i}) / 2 - T_{base}\]

during specified dates for a tibble/data frame of daily weather data.
For each day \(i\), the maximum
temperature is \(Tmax_{i}\) and minimum
is \(Tmin_{i}\). Note that the maximum
temperature \(Tmax\) is capped at
`maxt_cap`

degrees when calculating average temperature. The
defaults are \(T_{base} = 5^{\circ}C\)
and \(Tmax\) is capped at \(Tmax_{cap} = 30^{\circ}C\). (See McMaster and Wilhelm (1997) or https://farmwest.com/climate/calculator-information/gdd/
(Anon 2021))

The *gdd* functions in the *pollen* package (Nowosad 2019) and in *agroclim* (Serrano-Notivoli 2020) also calculate growing
degree days. While these functions do not allow for a fixed number of
days, and in the case of *agroclim::gdd* assume a more limited
growing season since the function appears to be tailored to grapes,
further variations on the formula above as outlined in Baskerville and Emin (1969) are available.

To calculate the growing degree days at Boonah using weather data
from the `boonah`

object between flowering and harvest
use:

```
## Growing Degree Days between two dates
crop$flower_date[4] # flowering date for 4th field or farm in 'crop'
#: [1] "2020-03-06"
crop$harvest_date[4] # harvest date for 4th field or farm in 'crop'
#: [1] "2020-03-26"
growing_degree_days(boonah, startdate = crop$flower_date[4],
enddate = crop$harvest_date[4]) #, monitor = TRUE)
#: [1] 359.05
```

`stress_days_over`

calculates the number of days when the
maximum temperature exceeded a base line `stress_temp`

during
specified dates for a tibble/data frame of daily weather data. The
default `stress_temp`

is set at \(30^{\circ}C\).

To calculate the number of stress days at Boonah between flowering and harvest, use:

`cumulative`

calculates the sum total of daily values
between two dates from a tibble/data frame of daily weather data.
Typically this is used for solar radiation or rainfall.

To calculate the total rainfall at Boonah between flowering and harvest, use:

`daily_mean`

calculates the daily average of a variable
between two dates from a tibble/data frame of daily weather data.
Typically this would be for temperature, rainfall or solar
radiation.

To calculate daily mean radiation in the 3 day period from day of flowering onwards (which also includes day of flowering), use:

```
## daily mean radiation for the three days ending on crop$flower_date[4]
crop$flower_date[4] # a particular flowering date
#: [1] "2020-03-06"
daily_mean(boonah, enddate = crop$flower_date[4], ndays = 3,
monitor = TRUE)
#: # A tibble: 3 × 2
#: date_met radn
#: <date> <dbl>
#: 1 2020-03-04 10.7
#: 2 2020-03-05 11.8
#: 3 2020-03-06 11
#: [1] 11.16667
```

To extract column(s) from a tibble/data frame of daily weather data
between two specified dates we use `weather_extract`

. Either
specify the start and end dates or specify one of these dates and also
the number of days after or before, respectively.

```
## Extract daily rainfall & maximum temperature data using %>% pipe operator
boonah |>
weather_extract(c(rain, maxt), date = date_met, startdate = ymd("2019-08-16"),
enddate = ymd("2019-08-21"))
#: # A tibble: 6 × 3
#: date_met rain maxt
#: <date> <dbl> <dbl>
#: 1 2019-08-16 0 26
#: 2 2019-08-17 0 28
#: 3 2019-08-18 0 25.7
#: 4 2019-08-19 0 26.8
#: 5 2019-08-20 0 23.1
#: 6 2019-08-21 0 26.3
```

We can add agrometeorological variables to the `crop`

tibble using the `tidyverse`

functions `map_dbl`

,
`map_dbl2`

and `pmap`

to calculate new columns
employing the weather data from the `boonah`

object. Use
`map_dbl`

for one varying date and `map_dbl2`

for
varying start and end dates. For more than two varying parameters, which
may be necessary if for instance our weather object contained multiple
locations or sites, then we can use `pmap`

. These functions
are from the `purrr`

library. Alternatively, we could use
functions from the `apply`

family such as `mapply`

from the `base`

package.

To add growing degree days 7 days post sowing and the number of
stress days above \(30^\circ C\) from
flowering to harvest to the `crop`

tibble, then we employ the
following `mutate`

syntax to extract the appropriate weather
data from the `boonah`

weather data object.

```
## Growing degree and stress days
crop2 <- crop |>
dplyr::mutate(gddays_post_sow_7d =
purrr::map_dbl(sowing_date, function(x)
growing_degree_days(boonah, startdate = x, ndays = 7)),
stressdays_flower_harvest =
purrr::map2_dbl(flower_date, harvest_date, function(x, y)
stress_days_over(boonah, startdate = x, enddate = y)))
print(crop2, n=5)
#: # A tibble: 10 × 5
#: sowing_date flower_date harvest_date gddays_post_sow_7d stressdays_flower_ha…¹
#: <date> <date> <date> <dbl> <dbl>
#: 1 2019-08-25 2019-10-14 2019-11-03 76.4 10
#: 2 2019-09-20 2019-11-09 2019-11-29 104. 20
#: 3 2019-12-18 2020-02-06 2020-02-26 132. 11
#: 4 2020-01-15 2020-03-06 2020-03-26 142. 4
#: 5 2020-02-15 2020-04-06 2020-04-26 145. 5
#: # ℹ 5 more rows
#: # ℹ abbreviated name: ¹stressdays_flower_harvest
```

Similarly, to add total rainfall for the 7 days post sowing and the mean daily radiation from flowering to harvest we use:

```
## Totals and daily means
crop3 <- crop |>
dplyr::mutate(totalrain_post_sow_7d =
purrr::map_dbl(sowing_date, function(x)
cumulative(boonah, var = rain, startdate = x, ndays = 7)),
meanrad_flower_harvest =
purrr::map2_dbl(flower_date, harvest_date, function(x, y)
daily_mean(boonah, var = radn, startdate = x, enddate = y)))
print(crop3, n=5)
#: # A tibble: 10 × 5
#: sowing_date flower_date harvest_date totalrain_post_sow_7d
#: <date> <date> <date> <dbl>
#: 1 2019-08-25 2019-10-14 2019-11-03 10.5
#: 2 2019-09-20 2019-11-09 2019-11-29 0
#: 3 2019-12-18 2020-02-06 2020-02-26 0
#: 4 2020-01-15 2020-03-06 2020-03-26 88.4
#: 5 2020-02-15 2020-04-06 2020-04-26 20.7
#: # ℹ 5 more rows
#: # ℹ 1 more variable: meanrad_flower_harvest <dbl>
```

`furrr`

For large datasets these calculations can be time consuming. One
approach that may prove useful is to use the `furrr`

package
which is a bridge between purrr‘s family of mapping functions and
future‘s parallel processing capabilities. If speed is an issue, then it
is worth trying because it is simple to implement. While some tweaking
may prove useful, it seems that the defaults work pretty well (see
`?future::plan`

). After setting the number of workers, then
simply replace mapping functions by putting `future_`

at the
front of the name of the mapping function. For instance,
`map2_dbl`

is replaced with `future_map2_dbl`

.
While the results are not shown here, to add total rain and mean
radiation as before, use something like:

```
ptm <- proc.time() # Start the clock!
## set number of 'furrr' workers
library(furrr)
plan(multisession, workers = 2)
## Totals and daily means
crop3 <- crop |>
dplyr::mutate(totalrain_post_sow_7d =
future_map_dbl(sowing_date, function(x)
cumulative(boonah, var = rain, startdate = x, ndays = 7)),
meanrad_flower_harvest =
future_map2_dbl(flower_date, harvest_date, function(x, y)
daily_mean(boonah, var = radn, startdate = x, enddate = y)))
print(crop3, n=5)
proc.time() - ptm # Stop the clock!
```

For recent work, we have found that setting 4 workers was optimal but this will of course depend on your setup.

When modelling crops, agronomists typically specify dates as the day
of year. Several functions are available for day of year calculations
and converting these back to dates. In `R`

, dates, times and
timezone data are easily manipulated using the `lubridate`

package.

The `day_of_year`

function is used to convert a date to
the day of year, which could be based on the calendar year starting on 1
January, the Australian financial year starting on 1 July or an
arbitrary starting date.

```
## Day of Calendar Year
day_of_year(ymd(c("2020-12-31", "2020-07-01", "2020-01-01")))
#: [1] 366 183 1
day_of_year(ymd(c("2020-12-31", "2020-07-01", "2020-01-01")), return_year = TRUE)
#: day year
#: 1 366 2020
#: 2 183 2020
#: 3 1 2020
## Day of Financial Year
day_of_year(ymd(c("2020-12-31", "2020-07-01", "2020-01-01")), type = "financial")
#: [1] 184 1 185
day_of_year(ymd(c("2020-12-31", "2020-07-01", "2020-01-01")), type = "fin",
return_year = TRUE)
#: day fin_year
#: 1 184 2020/2021
#: 2 1 2020/2021
#: 3 185 2019/2020
```

To convert a day of year to a date, use
`date_from_day_year`

noting that while the calendar year is
the default, we can specify the Australian financial year or an
arbitrary starting date.

```
## Convert day of year to a date
date_from_day_year(21,2021)
#: [1] "2021-01-21"
date_from_day_year(21,2021, type = "fina")
#: [1] "2021-07-21"
```

Finally, while we can use `day_of_year`

to obtain the day
of the current year, if a crop is planted near the end of the year then
we way wish to know the day of harvest which will fall in the next year.
The `day_of_harvest`

function provides the day of year in the
year of sowing which can be used to calculate other quantities like day
of flowering etc. Thus, quantities like the number of days between
harvest and sowing are easily calculated taking into account that the
crop may grow past the end of the year. Alternatively, these quantities
are also easily computed directly on the dates by using the
`lubridate`

package. For instance the convenience function
`cropgrowdays::number_of_days`

is essentially a call to
`as.numeric(finish_date - start_date) + 1`

.

```
## Day of harvest using the first day of the year of sowing as the base day
day_of_year(ymd("2021-01-05"))
#: [1] 5
day_of_harvest(x = ymd("2021-01-05"), sowing = ymd("2020-12-20")) # > 366
#: [1] 371
```

Note that the first calculation simply assumes the first day of the year is 1 January 2021 whereas the second calculation yields a result assuming the first day of the year is 1 January 2020. Hence, since 2020 is a leap year containing 366 days, then the day of harvest is \(366 + 5 = 371\).

Baskerville, G. L., and P. Emin. 1969. “Rapid
Estimation of Heat Accumulation
from Maximum and Minimum
Temperatures.” *Ecology* 50 (3): 514–17. https://doi.org/10.2307/1933912.

McMaster, Gregory S, and W W Wilhelm. 1997. “Growing Degree-Days:
One Equation, Two Interpretations.” *Agricultural and Forest
Meteorology* 87 (4): 291–300. https://doi.org/10.1016/S0168-1923(97)00027-0.

Nowosad, Jakub. 2019. *Pollen: Analysis of Aerobiological Data*.
https://CRAN.R-project.org/package=pollen.

Serrano-Notivoli, Roberto. 2020. *Agroclim: Climatic Indices for
Agriculture*. https://CRAN.R-project.org/package=agroclim.